Introduction to pan assembly

Pan assembly is main parts for distribution board, the connection terminal blocks fulfill these conditions in two ways:

-By marking each terminal block individually
-By their blue, green-yellow or black colored housings

In electrical systems, pan assembly busbar subject to the installation requirements stipulated in DIN VOE 0100 or IEC 60204-1 / EN 60204-1/VDE 0113-1 & IEC 60439, neutral, protective earth or phase conductors are often connected to central bus bars.
This requires clear labeling of the conductor or the terminal block to the corresponding circuit.

There are two type of the pan assemby

Type 1, MCB pan assembly
Incoming current: 125A / 250A
Outgoings current: 1-63A
Outgoings quantity:2W 4W 6W 8W 10W 12W 14W 16W 18W 20W 22W 24W

Type 2, MCCB pan assembly
lncoming:630A 400A 250A
Outgoing:400A 250A 125A
Outgoings quantity:2W 4W 6W 8W 10W 12W 14W


Post time: Apr-12-2021